Pinpoint Test Q: B115E:55

Normal Operation and Fault Conditions

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Condition
IPMA B115E:55	Camera Module: Not Configured	Sets in continuous memory and on-demand in the IPMA when the rear parking aid camera is not configured.

Possible Sources

Rear parking aid camera initialization

Q1 PERFORM THE PARKING AID CAMERA INITIALIZATION USING A DIAGNOSTIC SCAN TOOL
- Ignition ON.
- Using the diagnostic scan tool, perform the parking aid camera initialization procedure. REFER to: Parking Aid Camera Initialization .
Did the parking aid camera initialization procedure complete successfully?

Yes The system is operating correctly at this time.

No REFER to Parking Aid Camera Initialization .