DTC Chart: Information Center Module (ICM)
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
DTC Chart - ICM
| DTC | Description | Action |
|---|---|---|
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test BZ |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test CE |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test CH |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | GO to Pinpoint Test CT |
| U3000:41 | Control Module: General Checksum Failure | GO to Pinpoint Test CU |
| U3000:42 | Control Module: General Memory Failure | GO to Pinpoint Test CU |
| U3000:44 | Control Module: Data Memory Failure | GO to Pinpoint Test CU |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | GO to Pinpoint Test CU |
| U3000:54 | Control Module: Missing Calibration | GO to Pinpoint Test CU |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test CW |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test CY |