LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Mustang Mach 1, Automatic Trans >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake And Actuation - Vehicles With: Conventional Mechanical Parking Brake >> Removal And Installation >> Parking Brake Switch >> Removal

Parking Brake Switch: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the floor console. Refer to: FLOOR CONSOLE .
  2. Disconnect the parking brake switch electrical connector.
    GFD599553Courtesy of FORD MOTOR COMPANY
  3. Remove the bolt and the parking brake switch.

    Torque

    : 22 lb.in (2.5 Nm)

GFD599554Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals