Diagnostic Trouble Code (DTC) Chart
WARNING: This page is about a different car, the 2021 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Diagnostic Trouble Code Chart
| Module | DTC | Description | Action |
|---|---|---|---|
| PCM | P008A:00 | Low Pressure Fuel System Pressure - Too Low: No Sub Type Information | GO to Pinpoint Test HC |
| PCM | P008B:00 | Low Pressure Fuel System Pressure - Too High: No Sub Type Information | GO to Pinpoint Test HC |
| PCM | P00BA:00 | Low Fuel Pressure - Forced Limited Power: No Sub Type Information | GO to Pinpoint Test HC |
| PCM | P00BB:00 | Fuel Injector Insufficient Flow - Forced Limited Power: No Sub Type Information | GO to Pinpoint Test HC |
| PCM | P0148:00 | Fuel Delivery Error: No Sub Type Information | GO to Pinpoint Test HC |
| PCM | P0230:00 | Fuel Pump Primary Circuit: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P0231:00 | Fuel Pump Secondary Circuit Low: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P0232:00 | Fuel Pump Secondary Circuit High: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P025A:00 | Fuel Pump Module A Control Circuit/Open: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P025B:00 | Fuel Pump Module A Control Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P025C:00 | Fuel Pump Module A Control Circuit Low: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P025D:00 | Fuel Pump Module A Control Circuit High: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P027B:00 | Fuel Pump Module B Control Circuit Range/Performance: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P0627:00 | Fuel Pump A Control Circuit/Open: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P064A:00 | Fuel Pump Control Module A: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P166A:00 | Restraints Deployment Communication Circuit: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P2632:00 | Fuel Pump B Control Circuit/Open: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | P26EA:00 | Fuel Pump Control Module B: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | U0109:00 | Lost Communication With Fuel Pump Control Module A: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | U016C:00 | Lost Communication With Fuel Pump Control Module B: No Sub Type Information | GO to Pinpoint Test KC |
| PCM | U210B:00 | Lost Communication Between Fuel Pump Control Module A And Restraints Control Module: No Sub Type Information | GO to Pinpoint Test KC |