Pinpoint Test L: DTC (Diagnostic Trouble Code) U0212:00: Notes
Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.
Normal Operation and Fault Conditions
The PAM communicates with the SCCM through the HS-CAN1, HS-CAN2 and GWM.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | A continuous memory DTC that sets in the PAM if messages received from the SCCM are missing for 5 seconds or more. |
Possible Sources
- Communication network concern
- GWM concern
- SCCM
- PAM (integral to the BCM)