Front Bumper - Mach 1: Removal

Remove the front bumper cover. Refer to: Front Bumper Cover - Mach 1
1. Separate the ambient air temperature sensor bracket aside.
2. Separate the wiring harness retainer and position the wiring harness aside.
Courtesy of FORD MOTOR COMPANY
Separate the wiring harness guides and position the wiring harness aside.

Courtesy of FORD MOTOR COMPANY
NOTE: This step requires the aid of another technician.

Remove the bolts and the front bumper.

Torque

: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY