Symptom Chart: Instrument Panel Cluster (IPC)
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
Symptom Chart
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not respond to the scan tool | Fuse Wiring, terminals or connectors Communication concern Module |
REFER to: Communications Network . |
| The IPC is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| Multiple gauges, indicators, RTT indicators, warnings and chimes are inoperative or always on | Refer to the Pinpoint Test | GO to Pinpoint Test A |
| A virtual gauge (engine oil pressure, engine oil temperature, engine temperature, inlet air temperature, speedometer, tachometer, turbo boost or voltage) is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test B |
| Incorrect fuel gauge indication | Refer to the Pinpoint Test | GO to Pinpoint Test C |
| The odometer is inoperative | Refer to the Pinpoint Test | GO to Pinpoint Test D |
| The ABS warning indicator is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test E |
| The airbag warning indicator is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test F |
| The brake warning indicator is never on | Refer to the Pinpoint Test | GO to Pinpoint Test G |
| The brake warning indicator is always on | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| The electronic park brake fault indicator is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test I |
| The LED low beam malfunction indicator is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test J |
| The LH- RH turn signal, high beam or rear fog lamp (except North America) indicator is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test K |
| The lights on indicator is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test L |
| The MIL is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test M |
| The performance shift indicator is never on | Refer to the Pinpoint Test | GO to Pinpoint Test N |
| The PRNDL indicator is never on or does not display correctly | Refer to the Pinpoint Test | GO to Pinpoint Test O |
| The seatbelt warning indicator is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test P |
| The stability-traction control indicator (sliding car icon) is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test Q |
| The traction control disabled indicator (ESC OFF icon) is never or always on | Refer to the Pinpoint Test | GO to Pinpoint Test R |