LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer ST >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Fuel Charging And Controls - Turbocharger - 3.0L ECOBOOST >> Removal And Installation >> Wastegate Control Valve Solenoid >> Removal

Wastegate Control Valve Solenoid: Removal

  1. Disconnect the wastegate control valve solenoid electrical connector.
    GFD513438Courtesy of FORD MOTOR COMPANY
  2. Disconnect the wastegate control valve solenoid hoses. Use the General Equipment: Hose Clamp Remover/Installer
    GFD513439Courtesy of FORD MOTOR COMPANY
  3. Remove the wastegate control valve solenoid retainers and then remove the wastegate control valve solenoid.
GFD513440Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals