Vehicle On

The message center provides the vehicle on warning message to inform the driver they are exiting the vehicle when the engine is running. The IPC uses multiple inputs to determine the vehicle is stopped and the driver is preparing to exit the vehicle. The messages required to control the vehicle on warning message are as follows:

• Driver door ajar status
• Power pack status
• Transmission gear display

The IPC receives all required messages from the GWM over the HS-CAN3.

The GWM receives the driver door ajar status from the BCM over the HS-CAN1.

The GWM receives the power pack status and transmission gear display messages from the PCM over the HS-CAN1.