IPMB (Vehicles Equipped With 360° Degree View Camera)
NOTE:
Use caution when handling the coaxial cables. Damage may occur if the cable is bent at too sharp of an angle.
For vehicles equipped with a 360° degree view camera system, all camera views are produced by the IPMB using input from one or more camera(s). The processed video signals are sent from the IPMB to the APIM on shielded twisted pair.
In addition to generating the camera views and providing power to the cameras, the IPMB receives the video signals from the front, rear, LH and RH parking aid cameras through coaxial cables and determines which image(s) are sent to the APIM to be displayed on the audio system display.
The IPMB requires PMI when replaced. Refer to: Module Configuration - System Operation and Component Description .
NOTE:
When a new IPMB is installed, a camera alignment DTC is stored until the 360° degree camera alignment is successfully completed.