LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electric Powertrain Control - 3.3L DURATEC-V6 - Hybrid (BP) (2 Of 2) >> Diagnosis And Testing >> Electric Powertrain Control >> Pinpoint Tests >> Pinpoint Test V : P0A4C

Pinpoint Test V : P0A4C

  1. Normal Operation and Fault Conditions 

    REFER to: Electric Powertrain Control - System Operation and Component Description .

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    SOBDMC P0A4C:00 Generator Position Sensor Circuit Range/Performance: No Sub Type Information This DTC sets when an error is detected with the position reading's rationality check.

    Possible Sources 

    • Inverter System Controller (ISC)

  2. V1 CHECK FOR APPLICABLE SERVICE ARTICLES

    • CHECK OASIS for any applicable service articles: TSB, GSB, SSM or FSA.

    Was a service article found? 

    Yes  DISCONTINUE this test and FOLLOW the service article instructions.
    No  INSTALL a new Inverter System Controller (ISC). REFER to: Inverter System Controller [SOBDMC] .
scientia non olet · About LEMON Manuals