LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, RWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 3.3L DURATEC-V6 - Hybrid (BP) >> Removal And Installation >> Thermostat >> Installation

Removal And Installation: Thermostat: Installation

  1. Install a new O-ring seal and lubricate it with clean engine coolant. Refer to: Specifications .
  2. To install, reverse the removal procedure.
  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals