LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, RWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - 3.3L DURATEC-V6 - Hybrid (BP) >> Removal And Installation >> Cooling Module >> Installation

Cooling Module: Installation

  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install new condenser fitting O-ring seals. Refer to: Specifications .

  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
  4. Fill and bleed the electric cooling system. Refer to: Cooling System Filling and Bleeding .
scientia non olet · About LEMON Manuals