E Clutch: Notes

WARNING: This page is about a different variant/trim than selected.

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Special Tool(s) / General Equipment

Courtesy of FORD MOTOR COMPANY	100-002 (TOOL-4201-C) Holding Fixture with Dial Indicator Gauge
Courtesy of FORD MOTOR COMPANY	205-1018 Installation Tube
Courtesy of FORD MOTOR COMPANY	307-003 (T57L-500-B) Holding Fixture, Transmission
Courtesy of FORD MOTOR COMPANY	307-091 Handle, Torque Converter TKIT-2009TC-F
Courtesy of FORD MOTOR COMPANY	307-346 (T97T-7902-A) Retainer, Torque Converter TKIT-1998-LM (NavigatoR) TKIT-1997-F/FLM/LT
Courtesy of FORD MOTOR COMPANY	307-651 Bracket, Pump Remover/Installer
Courtesy of FORD MOTOR COMPANY	307-651-02 Lift fixture adapter for 307-651
Courtesy of FORD MOTOR COMPANY	307-661 Gauge, End Play TKIT-2009C-F TKIT-2009C-ROW
Courtesy of FORD MOTOR COMPANY	307-661-01 Spacers/Plate, Clearance Gage
Courtesy of FORD MOTOR COMPANY	307-662 Gauge, Clutch Pack Endplay TKIT-2009C-F TKIT-2009C-ROW
Courtesy of FORD MOTOR COMPANY	307-741 Spring Compressor, F Clutch
Courtesy of FORD MOTOR COMPANY	307-780 Converter Seal installer
Courtesy of FORD MOTOR COMPANY	307-787F8 Seal Installer/Sizer Input Shaft
Courtesy of FORD MOTOR COMPANY	307-790 Endplay Check Gauge
Courtesy of FORD MOTOR COMPANY	307-796 F2 Seal Guide, Installer and Sizer
Courtesy of FORD MOTOR COMPANY	307-797 Installer, Alignment Studs (3) and Alignment Pin (All 10R)
Courtesy of FORD MOTOR COMPANY	307-804 F9 Seal Guide, Installer and Sizer
Hydraulic Press
Magnet

Materials

Name	Specification
Motorcraft® MERCON® ULV Automatic Transmission Fluid XT-12-QULV	WSS-M2C949-A, MERCON® ULV