LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transmission - 10-Speed Automatic Transmission - 10R60 (2 Of 3)) >> Diagnosis And Testing >> DTC Chart and Pinpoint Tests - 3.0L EcoBoost >> Pinpoint Tests >> Pinpoint Test Aa : DTC P2700, P2701, P2702, P2703, P2704, 2705

Pinpoint Test Aa : DTC P2700, P2701, P2702, P2703, P2704, 2705

WARNING: This page is about a different variant/trim than selected.
  1. Normal Operation and Fault Conditions 

    The PCM monitors clutch applications if a non electrical fault is detected for the clutches a DTC is set in memory.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM P2700:00 Transmission Friction Element "A" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0751 or P0752, if either of these DTCs are set resolve them first.
    PCM P2701:00 Transmission Friction Element "B" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0761 or P0757, if either of these DTCs are set resolve them first.
    PCM P2702:00 Transmission Friction Element "C" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0761 or P0762, if either of these DTCs are set resolve them first.
    PCM P2703:00 Transmission Friction Element "D" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0766 or P0767, if either of these DTCs are set resolve them first.
    PCM P2704:00 Transmission Friction Element "E" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0771 or P0772, if either of these DTCs are set resolve them first.
    PCM P2705:00 Transmission Friction Element "F" Apply Time Range/Performance: No Sub Type Information DTC is set with either P2707 or P2708, if either of these DTCs are set resolve them first.

    Possible Sources 

    • Clutch stuck on
    • Clutch stuck off
    • Clutch damaged

  2. AA1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition OFF.

    • Ignition ON.

    • Using a diagnostic scan tool, clear the DTC for the PCM.

    • Wait 10 seconds.

    • Road test the vehicle.

    • Using a diagnostic scan tool, carry out the PCM self-test.

    Are DTC P2700, P2701, P2702, P2703, P2704, P2705 present in the PCM? 

    Yes  If either DTC either P0751 or P0752 are set resolve them first, otherwise for DTC P2700, REFER to: A Clutch . If either DTC either P0756 or P0757 are set resolve them first, otherwise for DTC P2701, REFER to: B Clutch . If either DTC either P0761 or P0762 are set resolve them first, otherwise for DTC P2702, REFER to: C Clutch . If either DTC either P0766 or P0767 are set resolve them first, otherwise for DTC P2703, REFER to: D Clutch . If either DTC either P0771 or P0772 are set resolve them first, otherwise for DTC P2704, REFER to: E Clutch . If either DTC either P2707 or P2708 are set resolve them first, otherwise for DTC P2705, REFER to: F Clutch .
    No  The fault is not present at this time and may be intermittent.
scientia non olet · About LEMON Manuals