LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Engine Cooling - 3.3L DURATEC-V6) >> Removal And Installation >> Transmission Fluid Heater Coolant Control Valve >> Installation

Transmission Fluid Heater Coolant Control Valve: Installation

WARNING: This page is about a different variant/trim than selected.
  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system without using a vacuum cooling system filler. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals