LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Engine Cooling - 3.3L DURATEC-V6) >> Removal And Installation >> Thermostat >> Installation

Removal And Installation: Thermostat: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a new O-ring seal and lubricate it with clean engine coolant. Refer to: Specifications .
  2. To install, reverse the removal procedure.
  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals