LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Limited Hybrid, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission - 10-Speed Automatic Transmission - 10R60 (1 Of 3)) >> Diagnosis And Testing >> DTC Chart and Pinpoint Tests - 2.3L EcoBoost (201kW/273PS) >> Pinpoint Tests >> Pinpoint Test Aa : DTC P2700, P2701, P2702, P2703, P2704, P2705

Pinpoint Test Aa : DTC P2700, P2701, P2702, P2703, P2704, P2705

WARNING: This page is about a different variant/trim than selected.
  1. Normal Operation and Fault Conditions 

    The PCM monitors clutch applications if a non electrical fault is detected for the clutches a DTC is set in memory.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM P2700:00 Transmission Friction Element "A" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0751 or P0752, if either of these DTCs are set resolve them first.
    PCM P2701:00 Transmission Friction Element "B" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0756 or P0757, if either of these DTCs are set resolve them first.
    PCM P2702:00 Transmission Friction Element "C" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0761 or P0762, if either of these DTCs are set resolve them first.
    PCM P2703:00 Transmission Friction Element "D" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0766 or P0767, if either of these DTCs are set resolve them first.
    PCM P2704:00 Transmission Friction Element "E" Apply Time Range/Performance: No Sub Type Information DTC is set with either P0771 or P0772, if either of these DTCs are set resolve them first.
    PCM P2705:00 Transmission Friction Element "F" Apply Time Range/Performance: No Sub Type Information DTC is set with either P2707 or P2708, if either of these DTCs are set resolve them first.

    Possible Sources 

    • Clutch stuck on
    • Clutch stuck off
    • Clutch damaged

  2. AA1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition OFF.

    • Ignition ON.

    • Using a diagnostic scan tool, clear the DTC for the PCM.

    • Wait 10 seconds.

    • Road test the vehicle.

    • Using a diagnostic scan tool, carry out the PCM self-test.

    Are DTC P2700, P2701, P2702, P2703, P2704, P2705 present in the PCM? 

    Yes  If either DTC P0751 or P0752 are set resolve them first, otherwise for DTC P2700, REFER to: A Clutch . If either DTC P0756 or P0757 are set resolve them first, otherwise for DTC P2701, REFER to: B Clutch . If either DTC P0761 or P0762 are set resolve them first, otherwise for DTC P2702, REFER to: C Clutch . If either DTC P0766 or P0767 are set resolve them first, otherwise for DTC P2703, REFER to: D Clutch . If either DTC P0771 or P0772 are set resolve them first, otherwise for DTC P2704, REFER to: E Clutch . If either DTC P2707 or P2708 are set resolve them first, otherwise for DTC P2705, REFER to: F Clutch .
    No  The fault is not present at this time and may be intermittent.
scientia non olet · About LEMON Manuals