LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Explorer Base, 3.3L Eng VIN B >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Wheel Hubs And Bearings - Full Floating Axle - Vehicles With: DANA M275 DANA M300) >> Removal And Installation >> Wheel Bearings, Wheel Hub Seal and Wheel Bearing Cups - Vehicles With: Dual Rear Wheels >> Removal

Wheel Bearings, Wheel Hub Seal and Wheel Bearing Cups - Vehicles With: Dual Rear Wheels: Removal

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Heavy duty shown, light duty similar.
  1. Remove the wheel hub. Refer to: Wheel Hub .
  2. Remove and discard the wheel hub inner seal.
    GFD405016Courtesy of FORD MOTOR COMPANY
  3. Remove the inner wheel hub bearing.
    GFD405017Courtesy of FORD MOTOR COMPANY
  4. Remove and discard the inner and outer wheel bearing cup. Use the General Equipment: Punch Use the General Equipment: Copper Hammer
GFD405018Courtesy of FORD MOTOR COMPANY