LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Expedition XL, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1000 (Parking Aid - Vehicles With: Rear Parking Aid) >> Removal And Installation >> Rear Parking Aid Sensor >> Removal

Rear Parking Aid Sensor: Removal

WARNING: This page is about a different car, the 2021 Lincoln Nautilus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure can be used for all locations of the component.
  1. Remove the rear bumper cover. Refer to: Rear Bumper Cover .
  2. Remove the rear parking aid sensor.

    1. Disconnect the rear parking aid sensor electrical connector.
    2. Release the tabs.
    3. Remove the rear parking aid sensor from the bracket.

GFD621396Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals