P2ABA - WASTEGATE Position Sensor B Circuit

DTC DESCRIPTION P2ABA - WASTEGATE POSITION SENSOR B CIRCUIT

Description:	This DTC sets when the TCWP2 circuit voltage is greater than or less than a calibrated threshold.
Possible Causes:	Damaged or restricted wastegate motor linkage TCWP2 circuit open TCWP2 circuit short to ground TCWP2 circuit short to voltage Damaged turbocharger wastegate position 2 sensor Damaged harness connector
Diagnostic Aids:	Check the harness for intermittent concerns, incorrect connections, routing, alterations and damage due to contact with other components.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test HN.