P139A - EGR Sensor C Hoses Reversed
DTC DESCRIPTION P139A - EGR SENSOR C HOSES REVERSED
| Description: | At idle, the exhaust gas recirculation (EGR) monitor commands the EGR valve closed and checks the differential pressure across the EGR tube orifice which should be zero to indicate the hoses are connected and not restricted. This DTC sets when the differential pressure indicated by the sensor exceeds a maximum threshold or falls below a minimum threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Look for signs of water or icing in the hose. Verify the hose connection and routing. Check the differential pressure feedback EGR sensor for correct mounting and function. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HE. | ||