P1101 - Mass Air Flow Sensor Out Of Self Test Range
DTC DESCRIPTION P1101 - MASS AIR FLOW SENSOR OUT OF SELF TEST RANGE
| Description: | This DTC sets when during ignition ON, engine OFF, the mass air flow (MAF) sensor output signal is greater than a calibrated limit or during ignition ON, engine running, the MAF output signal is not within the calibrated range. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Diagnose circuit DTCs before range or performance DTCs. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DC. | ||