Side Parking Aid Camera: Installation

All vehicles 

1. To install, reverse the removal procedure.

   Vehicles equipped with 360° cameras only 

2. Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB initialize the IPMB. Refer to: Parking Aid Camera Initialization  .
3. Align the 360° cameras. Refer to: 360 Degree View Camera Alignment  .

   Vehicles equipped with 360° camera and Trailer Reverse Guidance 

4. Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB initialize the IPMB. Refer to: Parking Aid Camera Initialization  .
5. Align the 360° cameras. Refer to: 360 Degree View Camera Alignment  .