DTC Chart: BCM
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to: Diagnostic Methods .
| DTC | Description | Action |
|---|---|---|
| B115E:01 | Camera Module: General Electrical Failure | GO to Pinpoint Test A |
| B115E:02 | Camera Module: General Signal Failure | GO to Pinpoint Test A |
| B115E:08 | Camera Module: Bus Signal/Message Failure | GO to Pinpoint Test A |
| B115E:49 | Camera Module: Internal Electronic Failure | GO to Pinpoint Test A |
| B115E:55 | Camera Module: Not Configured | GO to Pinpoint Test P |
| B115E:9A | Camera Module: Component or System Operating Conditions | Sets as an on-demand DTC in the BCM when the prerequisite conditions are not met for the on-demand self test. INSPECT the liftgate to make sure it is fully closed and DIAGNOSE any other Diagnostic Trouble Codes (DTCs) present in the BCM. Refer to: Body Control Module (BCM) . |
| All other Diagnostic Trouble Codes (DTCs) | - | Refer to: Body Control Module (BCM) . |