LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Expedition Platinum, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (Rear Suspension) >> Removal And Installation >> Rear Shock Absorber - Vehicles With: Dynamic Suspension >> Installation

Rear Shock Absorber - Vehicles With: Dynamic Suspension: Installation

WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. If equipped with dynamic suspension, calibrate the suspension height sensor. Connect the scan tool and carry out the Ride Height Calibration routine. Follow the scan tool directions.
scientia non olet · About LEMON Manuals