Pinpoint Test C : Unusual Starter Noise
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- C1 CHECK THE STARTER MOUNTING
- Inspect the starter mounting bolts for looseness.
Is the starter motor mounted correctly?
Yes GO to C2 No INSTALL the starter motor correctly. REFER to: Starter Motor - Raptor or Starter Motor . - C2 CHECK FOR STARTER NOISE
- Ignition OFF.
- Connect a remote starter switch between the starter solenoid C1716A-1 ("B" terminal) and C1716B-1 ("S" terminal).
- Engage the starter and verify the noise is due to starter operation.
Is the noise due to the starter engagement?
Yes REFER to: Starter Motor Drive Gear and Flywheel Ring Gear Inspection or Starter Motor Drive Gear and Flywheel Ring Gear Inspection - Raptor . No REFER to: Engine . to continue diagnosis.