LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Expedition Platinum, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (MULTIFUNCTION Electronic Modules) >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test R : U1000:00 >> Pinpoint Test R : U1000:00

Pinpoint Test R : U1000:00

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

  1. R1 REVIEW THE DIAGNOSTIC TROUBLE CODES (DTCS)

    • Review the Diagnostic Trouble Codes (DTCs) from the BCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present besides U1000:00? 

    Yes  CORRECT all other Diagnostic Trouble Codes (DTCs). REFER to DTC Chart: Body Control Module (BCM) .
    No  GO to  R2
  2. R2 REPEAT THE BCM (BODY CONTROL MODULE) SELF-TEST

    • Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).

    • Wait 10 seconds.

    • Repeat the BCM self-test.

    Is DTC U1000:00 still present? 

    Yes  Refer to: BCM Hardware Testing
    No  The system is operating correctly at this time. The circuit short has been repaired.