Pinpoint Test S : U1000:00
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- S1 REVIEW THE DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Perform the BCM self-test.
- Review the Diagnostic Trouble Codes (DTCs) from the BCM self-test.
Are any Diagnostic Trouble Codes (DTCs) present besides U1000:00?
Yes CORRECT the Diagnostic Trouble Codes (DTCs). REFER to the DTC Chart: Body Control Module (BCM) . No GO to S2 - S2 REPEAT THE BCM (BODY CONTROL MODULE) SELF-TEST
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Repeat the BCM self-test.
Is DTC U1000:00 still present?
Yes Refer to BCM GUIDED ROUTINE . No The system is operating correctly at this time. The circuit short has been repaired.