Pinpoint Test AY : The Engine Oil Temperature Display Is Inoperative
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- AY1 VERIFY THE IPC (INSTRUMENT PANEL CLUSTER) IS SET TO THE ENGINE OIL TEMPERATURE DISPLAY
- Ignition ON.
-
NOTE: The IPC and message center navigation can be found in the Owner's Literature.
Using the message center controls, make sure the IPC is set to the engine oil temperature display.
Is the IPC set to the engine oil temperature display screen?
Yes GO to AY2 No The engine oil temperature display is operating correctly. The IPC was not set to the correct display. - AY2 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST
- Using a diagnostic scan tool, perform the IPC self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes REFER to DTC Chart: Instrument Panel Cluster (IPC) . No DIAGNOSE all engine oil temperature Diagnostic Trouble Codes (DTCs). Refer to: Electronic Engine Controls- 6.7L Power Stroke Diesel .