Electric Brake Booster (EBB) - Full Hybrid Electric Vehicle (FHEV)/Plug-In Hybrid Electric Vehicle (PHEV): Installation
- To install, reverse the removal procedure.
- Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
- Carry out the following service functions using the scan tool and following the diagnostic scan tool on-screen instructions.
- Carry out the ABS Brake System Pressure Bleeding and Bleed Check.
- Carry out the ABS Calibration.
- Carry out the EPB initialization.
- Run the PCMPATS programming application and then carry out the Module Initialization (Parameter Reset) using the scan tool and following the diagnostic scan tool on-screen instructions.