LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Escape Titanium >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Side And Rear Vision >> Diagnosis And Testing >> Blind Spot Information System >> Pinpoint Tests >> Pinpoint Test N: U3000:44, U3000:45, U3000:46, U3000:49

Pinpoint Test N: U3000:44, U3000:45, U3000:46, U3000:49

  1. Normal Operation and Fault Conditions 

    The SODL and SODR set a control module failure DTC when an internal failure has been detected.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    SODL U3000:44 Control Module: Data Memory Failure Sets when the SODL detects an internal fault. CLEAR the SODLDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:44 returns, INSTALL a new SODL. REFER to: Side Obstacle Detection Control Module (SODCM) 
    SODR U3000:44 Control Module: Data Memory Failure Sets when the SODR detects an internal fault. CLEAR the SODRDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:44 returns, INSTALL a new SODR. REFER to: Side Obstacle Detection Control Module (SODCM) 
    SODL U3000:45 Control Module: Program Memory Failure Sets when the SODL detects an internal fault. CLEAR the SODLDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:45 returns, INSTALL a new SODL. REFER to: Side Obstacle Detection Control Module (SODCM) 
    SODR U3000:45 Control Module: Program Memory Failure Sets when the SODR detects an internal fault. CLEAR the SODRDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:45 returns, INSTALL a new SODR. REFER to: Side Obstacle Detection Control Module (SODCM) 
    SODL U3000:46 Control Module: Calibration/Parameter Memory Failure Sets when the SODL detects an internal fault. CLEAR the SODLDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:46 returns, INSTALL a new SODL. REFER to: Side Obstacle Detection Control Module (SODCM) 
    SODR U3000:46 Control Module: Calibration/Parameter Memory Failure Sets when the SODR detects an internal fault. CLEAR the SODRDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:46 returns, INSTALL a new SODR. REFER to: Side Obstacle Detection Control Module (SODCM) 
    SODL U3000:49 Control Module: Internal Electronic Failure Sets when the SODL detects an internal fault. CLEAR the SODLDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:49 returns, INSTALL a new SODL. REFER to: Side Obstacle Detection Control Module (SODCM) 
    SODR U3000:49 Control Module: Internal Electronic Failure Sets when the SODR detects an internal fault. CLEAR the SODRDTC and REPEAT the self-test. If the continuous memory or on-demand DTC U3000:49 returns, INSTALL a new SODR. REFER to: Side Obstacle Detection Control Module (SODCM) 

    Possible Sources 

    • SODL
    • SODR

  2. Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods 

scientia non olet · About LEMON Manuals