Pinpoint Test CB: The Airbag Secondary Warning Chime Is Inoperative
- Normal Operation and Fault Conditions
REFER to: Warning Chimes - System Operation and Component Description .
Possible Sources
- Normal condition
- IPC
- CB1 CHECK IPC (INSTRUMENT PANEL CLUSTER) DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using a diagnostic scan tool, perform the IPC self-test.
Is DTC P1534:01 recorded?
Yes INSTALL a new IPC. REFER to: Instrument Panel Cluster (IPC) No The system is operating correctly at this time. The airbag secondary warning chime sounds only when a fault in the airbag warning indicator is present and DTC P1534:01 is recorded.