Network Message Chart
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Accessory delay | BCM | Input used to control the overall chime function. |
| Active park assist chime request | PAM | Input used to control the active park assist chime. |
| Adaptive cruise control warning request | IPMA | Input used to control the adaptive cruise control warning chime. |
| Audio chime status | ACM | Input used to control the source of the chime based on ACM chime status. |
| Brake chime request | ABS module | Input used to control the service stability-traction control system chime. |
| Collision avoidance chime request | IPMA | Input used to control the forward collision warning chime. |
| CTA left status | SODL | Input used to control the BLIS®)/ CTA chime. |
| CTA right status | SODR | Input used to control the BLIS®)/ CTA chime. |
| Driver door ajar status | BCM | Input used for module wake up to initiate the chime. Input used for the ignition-engine on warning chime. Input used for the transmission not in park warning chime. Input used to control the Electric Vehicle (EV) engine on reminder chime when in Electric Vehicle (EV) mode. |
| Driver seatbelt buckle status | RCM | Input used to control the Belt-Minder® and seatbelt warning chime. |
| Engine rpm data | PCM | Input used to control the chime volume. |
| Forward collision warning chime request | IPMA | Input used for the forward collision warning chime. |
| Front passenger detect status | RCM | Input used to control the Belt-Minder® chime and seatbelt warning chime. |
| Gear lever position | PCM (Gas) / SOBDMC (HEV) | Input used to control the Belt-Minder® chime. Input used to control the Electric Vehicle (EV) engine on reminder chime when in Electric Vehicle (EV) mode. |
| GSM gear message request | GSM | Input used to control the transmission not in park warning chime (rotary shift). |
| Headlamp on warning chime | BCM | Input used to control the headlamps on warning chime. |
| Ignition status | BCM | Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. Input used to control the transmission not in park warning chime. |
| Key-in-ignition status | BCM | Input used to control the key-in-ignition chime status. |
| Lane keeping system hands off display | IPMA | Input used to control the lane keeping system hands off the steering wheel warning chime. |
| Left turn lamp on request | BCM | Input used for the turn signal-hazard (tick-tock) chime. |
| Low fuel warning indicator request | PCM | Input used for the low fuel warning chime. |
| Memory feedback request | DSM | Input used for the memory seat feedback chime. |
| Odometer count | PCM | Input used for the turn signal left on warning chime. |
| Parking aid chime request | PAM | Input used to control the parking aid chime status. |
| Passenger seatbelt buckle status | RCM | Input used to control the Belt-Minder® chime and seatbelt warning chime. |
| Perimeter alarm chime request | BCM | Input used to control the perimeter alarm chime status. |
| Power pack status | PCM (Gas) / SOBDMC (HEV) | Input used for the ignition-engine on warning chime. Input used to control the Electric Vehicle (EV) engine on reminder chime when in Electric Vehicle (EV) mode. |
| Power liftgate chime request | RGTM | Input used to control the liftgate opening chime. |
| Right turn lamp on request | BCM | Input used for the turn signal-hazard (tick-tock) chime. |
| Side obstacle status-left | SODL | Input used to control the BLIS®)/ CTA chime. |
| Side obstacle status-right | SODR | Input used to control the BLIS®)/ CTA chime. |
| Transmission gear display | PCM (Gas) / SOBDMC (HEV) | Input used for the ignition-engine on warning chime. Input used to control the transmission not in park warning chime. |
| Transmission gear status | PCM (Gas) / SOBDMC (HEV) | Input used to control the transmission not in park warning chime. |
| Transport mode | BCM | Input used to control the transmission not in park warning chime. |
| Turn signal switch status | SCCM | Input used for the turn signal left on chime. |
| Vehicle speed | PCM | Input used to control the Belt-Minder® chime Input used to control the transmission not in park warning chime. |
Module Network Input Messages - ACM / DSP
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| BeltMinder® audio mute | IPC | Input from the IPC to control the BeltMinder® audio chime output. |
| Chime controls | IPC | Input used to control the following chime operations: chime priority.chime volume level.how long a chime tone sounds and how long a tone is off.how often the chime tones.which chime to sound.which speakers (front/rear) sound specific chimes. |
| Chime power up | IPC | Input used to initiate the audio system as the chime source. |
| Chime source | IPC | Input used to configure the chime source (IPC or the audio system). |
| IPC chime request | IPC | Input from the IPC used to control the audio chime output. |