| A module does not communicate with the diagnostic scan tool |
REFER to: Communications Network |
| The active park assist system does not activate when the active park assist switch is pressed |
GO to Pinpoint Test H |
| The centerstack infotainment display and/or the IPC message center display shows an active park assist fault message |
GO to Pinpoint Test I |
| The centerstack infotainment display shows the active park assist not available message |
GO to Pinpoint Test J |
| The active park assist system does not position the vehicle correctly |
GO to Pinpoint Test K |
| The active park assist system does not offer available parking spaces |
GO to Pinpoint Test L |
| The centerstack infotainment display shows POA NOT AVAILABLE when the turn signal is used during a parallel park out assist maneuver |
GO to Pinpoint Test M |
| The active park assist system does not offer the parallel park out assist feature |
GO to Pinpoint Test N |