LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Escape Titanium Plug-In Hybrid >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Aid - Vehicles With: 180 Degree Camera/360 Degree Camera/Parking Aid Camera >> Removal And Installation >> Rear Parking Aid Camera >> Removal

Rear Parking Aid Camera: Removal

  1. Remove the liftgate lower interior trim panel. Refer to: Liftgate Trim Panel
  2. Disconnect the electrical connector.
    GFD590565Courtesy of FORD MOTOR COMPANY
  3. Release the tabs, position the retaining plate and remove the rear view camera.
GFD590566Courtesy of FORD MOTOR COMPANY