Pinpoint Test R: B115E:55 Or B148E:55
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B115E:55 Camera Module: Not Configured Sets in continuous memory and on-demand in the IPMB when the rear parking aid camera is not configured. IPMB B115E:55 Camera Module: Not Configured Sets in continuous memory and on-demand in the IPMB when the rear parking aid camera is not configured. IPMB B148E:55 Front Camera: Not Configured Sets in continuous memory and on-demand in the IPMB when the front parking aid camera is not configured. Possible Sources
- Rear parking aid camera initialization
- R1 PERFORM THE PARKING AID CAMERA INITIALIZATION USING A DIAGNOSTIC SCAN TOOL
- Ignition ON.
- Using the diagnostic scan tool, perform the parking aid camera initialization procedure.
Did the parking aid camera initialization procedure complete successfully?
Yes The system is operating correctly at this time. No REFER to the parking aid camera initialization procedure to troubleshoot the concern.