Camera Image Generation

The front and rear parking aid cameras are on any time they receive voltage (when the ignition is ON), but a video signal is only generated under certain conditions. When reverse gear is selected or the front parking aid camera view switch is pressed, the IPMB sends an enable request message to the front and rear cameras to turn the video signal output on. When any gear except reverse is selected, the IPMB sends a disable request message to the cameras to turn the video signal off when the vehicle speed reaches 10 mph (16 km/h), and sends an enable request message to turn the video signal on when vehicle speed falls below 5 mph (8 km/h). If the front or rear camera is not configured properly, some features and views may be inoperative.