Pinpoint Test W: U3000:42 Or U3000:49
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMB U3000:42 Control Module: General Memory Failure Sets in the IPMB when module RAM hardware fails. Possible Sources
- IPMB
- W1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPMB (IMAGE PROCESSING MODULE B) SELF-TEST
- Ignition ON.
- Using the diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using the diagnostic scan tool, perform the IPMB self-test.
Is DTC U3000:42 retrieved?
Yes INSTALL a new IPMB, REFER to: Image Processing Module B (IPMB) No The system is operating correctly at this time.