Pinpoint Test O: B115E:49
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B115E:49 Camera Module: Internal Electronic Failure Sets in continuous memory and on-demand in the BCM when an internal fault is detected in the rear parking aid camera. IPMB B115E:49 Camera Module: Internal Electronic Failure Sets in continuous memory and on-demand in the IPMB when an internal fault is detected in the rear parking aid camera. Possible Sources
- Rear parking aid camera
- O1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPMB (IMAGE PROCESSING MODULE B) SELF-TEST
- Ignition ON.
- Using the diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using the diagnostic scan tool, perform the IPMB self-test.
Is DTC B115E:49 retrieved?
Yes INSTALL a new rear parking aid camera, REFER to: Rear Parking Aid Camera No The system is operating correctly at this time.