LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Wildtrak, 4D Utility >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Charging And Controls - 2.3L ECOBOOST (199KW/270PS)) >> Diagnosis And Testing >> Fuel Charging >> Global Customer Symptom Code (GCSC) Chart

Global Customer Symptom Code (GCSC) Chart

WARNING: This page is about a different variant/trim than selected.

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Global Customer Symptom Code Chart 

Customer Symptom Action
Driving Performance > Runs Rough > Acceleration > Always GO to Pinpoint Test DI 
Driving Performance > Runs Rough > Cruise/ Steady Speed > Always GO to Pinpoint Test DI 
Driving Performance > Runs Rough > Deceleration > Always GO to Pinpoint Test DI 
Driving Performance > Runs Rough > All Running Modes > Always GO to Pinpoint Test DI 
Driving Performance > Idle Quality > Fast > Always GO to Pinpoint Test DI 
Driving Performance > Idle Quality > Rolling > Always GO to Pinpoint Test DI 
Driving Performance > Idle Quality > Slow > Always GO to Pinpoint Test DI 
Driving Performance > Idle Quality > Slow Return > Always GO to Pinpoint Test DI 
Driving Performance > Idle Quality > Rough > Always GO to Pinpoint Test DI 
Driving Performance > Idle Quality > Stationary Elevated Idle Control > Performance/Function GO to Pinpoint Test DI 
Driving Performance > Stalls/Quits > At Idle > Always GO to Pinpoint Test DI 
Driving Performance > Stalls/Quits > Acceleration > Always GO to Pinpoint Test DI 
Driving Performance > Stalls/Quits > Cruise/ Steady Speed > Always GO to Pinpoint Test DI 
Driving Performance > Hesitates/Stumble > Acceleration > Always GO to Pinpoint Test DI 
Driving Performance > Hesitates/Stumble > Cruise/ Steady Speed > Always GO to Pinpoint Test DI 
Driving Performance > Engine Surge > At Idle > Always GO to Pinpoint Test DI 
Driving Performance > Engine Surge > Acceleration > Always GO to Pinpoint Test DI 
Driving Performance > Engine Surge > Cruise/ Steady Speed > Always GO to Pinpoint Test DI 
Driving Performance > Engine Surge > Deceleration > Always GO to Pinpoint Test DI