LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Wildtrak, 4D Utility >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Emission Control - 2.3L ECOBOOST (199KW/270PS)) >> Removal And Installation >> Crankcase Vent Oil Separator >> Installation

Crankcase Vent Oil Separator: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the crankcase vent oil separator and tighten in the sequence shown in illustration.

    Torque: 97 lb.in (11 Nm)

    Fig 1: Crankcase Vent Oil Separator Tightening Sequence
    GFD625618Courtesy of FORD MOTOR COMPANY
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals