LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Wildtrak, 4D Utility >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine - 2.3L ECOBOOST (199KW/270PS)) >> Removal And Installation >> Flexplate >> Removal

Removal And Installation: Flexplate: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting .
  2. Remove the automatic transmission. Refer to: Transmission - 2.3L EcoBoost (199kW/270PS) .
    • NOTE: Do not reuse the flexplate bolts.

      Remove the bolts and the flexplate.

    • Discard the bolts.

GFD624115Courtesy of FORD MOTOR COMPANY