LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Wildtrak, 4D Utility >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine - 2.3L ECOBOOST (199KW/270PS)) >> General Procedures >> Engine Oil Draining and Filling >> Filling

Engine Oil Draining and Filling: Filling

WARNING: This page is about a different variant/trim than selected.
    1. Lubricate the new engine oil filter sealing surface with clean engine oil.
    2. Install the new engine oil filter.

      Torque: Stage 1: 71 lb.in (8 Nm) Stage 2: 180 deg.

    GFD623965Courtesy of FORD MOTOR COMPANY
  2. Install the engine rear undershield. Refer to: Engine Rear Undershield .
  3. Fill the engine with clean engine oil. Refer to: Specifications .
GFD623966Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals