Engine Oil Draining and Filling: Draining
WARNING: This page is about a different variant/trim than selected.
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting .
- Remove the engine rear undershield. Refer to: Engine Rear Undershield .
-
- Remove the oil pan drain bolt and drain the engine oil. Use the General Equipment: Oil Drain Equipment
- Install the oil pan drain bolt.
Torque: 20 lb.ft (27 Nm)
- Remove and discard the engine oil filter. Use the General Equipment: Oil Drain Equipment
-
- Using brake cleaner, clean the drain troughs. Use the General Equipment: Oil Drain Equipment
Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
- Wipe the drain troughs clean.
- Using brake cleaner, clean the drain troughs. Use the General Equipment: Oil Drain Equipment