Transmission Draining and Filling
WARNING: This page is about a different variant/trim than selected.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
Special Tool(s) / General Equipment
| Fluid Suction Gun |
|---|
Materials
| Name | Specification |
|---|---|
| Motorcraft® Dual Clutch Transmission FluidXT-11-QDC | WSS-M2C200-D2 |
-
NOTE: Make sure that the vehicle is level.
With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting
-
WARNING: Be prepared to collect escaping fluid.
Remove the drain plug and drain the transmission fluid.
Torque: 26 lb.ft (35 Nm)
- Remove the fill plug.
-
NOTE: The minimum fluid level should be no more then 3mm below the transmission fluid fill hole.
Fill the transmission. Refer to: Specifications
Use the General Equipment: Fluid Suction Gun
Material: Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)
- Install the fill plug.
Torque: 26 lb.ft (35 Nm)