Pinpoint Test Y: Rattle/Harsh Vibration While Driving
WARNING: This page is about a different variant/trim than selected.
- Normal Operation and Fault Conditions
- Broken dual mass flywheel
- Gently accelerate the vehicle between idle and 2000 RPM. If there is an excessive rattle and harsh vibration, remove the clutch and inspect the flywheel. REFER to: Clutch Disc and Pressure Plate
Possible Sources
- Dual mass flywheel
- Broken dual mass flywheel
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods