LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Wildtrak, 4D Utility >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.3L ECOBOOST (199KW/270PS)) >> Removal And Installation >> Cylinder Head Temperature 2 (CHT2) Sensor >> Removal

Cylinder Head Temperature 2 (CHT2) Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
    • Position aside the cover and disconnect the harness retainer and electrical connector. Remove the cylinder head temperature 2 (CHT2) sensor and heat shield.

      Torque: 97 lb.in (11 Nm)

GFD625774Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals