LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Sport First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 810 (Engine Cooling - 2.5L DURATEC - Hybrid (121KW/164PS) (BG)) >> Removal And Installation >> Transmission Fluid Cooler Coolant Control Valve >> Installation

Transmission Fluid Cooler Coolant Control Valve: Installation

WARNING: This page is about a different car, the 2021 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system without using a vacuum cooling system filler. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 
scientia non olet · About LEMON Manuals