LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2021 >> Bronco Sport First Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 810 (Engine Cooling - 2.5L DURATEC - Hybrid (121KW/164PS) (BG)) >> Removal And Installation >> Cooling Module >> Installation

Cooling Module: Installation

WARNING: This page is about a different car, the 2021 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Install new condenser fitting O-ring seals. Refer to: Specifications
  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 
  4. Evacuate, leak test and charge the A/C system. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - Hybrid Electric Vehicle (HEV), Vehicles With: R1234YF Refrigerant . Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - Hybrid Electric Vehicle (HEV), Vehicles With: R134A Refrigerant
scientia non olet · About LEMON Manuals